Mayco Engobe EG-002 Speckled Buff 473ml

Fires matte ivory with brown speckles. Engobes can be used to change the colour of your clay body surface without the risk of cross contamination that comes from using two different coloured clays in your studio. They are useful as a base to vary the result of a glaze and are often used for a variety of decorative techniques, such as sgraffito and majolica. Stir well. Using a soft fan brush, apply 2-3 coats to wet clay, greenware or soft fired, cone 04 bisque (1940°F/1060°C). Allow the engobe to dry between each coat. If desired, apply 2-3 coats of another glaze overtop. Fire to preferred temperature; cone 5-10 (2167°F-2345°F / 1186°C-1285°C). Can be used on the bottom of your wares - these engobes will not stick to kiln shelves when 2 coats are applied, heavier application may cause the glaze to flux. Results can vary based on the kiln wash you have applied to your shelves. Testing is recommended.  Can be used in oxidation or reduction firings. The choice of clay body, thickness of application, firing process, and temperature will greatly affect the fired results. Always test your application on your clay body in your kiln environment.  All non-toxic, dinnerware and food safe when used with a clear glaze. Image shows chip fired flat on a white clay body fired to cone 6 oxidation.